In order to understand why roof flashing is so important, you’ll need to know a little more about its purpose and why it is so effective. Where areas of the roof come together and a watertight junction is needed, flashing is used in order to meet this need.
There are many areas of a roof that do not provide enough protection when it comes to the elements such as chimneys, pipes, vents, or odd roof configurations that come together improperly. Flashing is used to ensure these areas are sealed properly, and in the process – this will allow rain and other elements to be deflected. Now it’s important to note that not all flashing is the same, and there are different types for different situations.
When it comes to entire roof replacement, you will more than likely hire the services of a professional to have the job done. If you do not choose to have a professional work with your roof, you will be faced with selecting all the materials and equipment needed to complete the work.
Some of these materials will include roof flashing
This can be flashing that goes around the chimney, ventilation tubes, pipes, and crevices where water needs to flow without affecting the underlayment of the roof. It’s also important to note that roof intersections will need to be properly secured and the correct type of flashing will need to be used in order to ensure proper drainage.
Working with Repairs
If you hired roofing contractors in jacksonville to make repairs on a roof were flashing is needed, it will be extremely important for them to know what type of flashing will be required. Whether you’re making your repairs around the chimney area, ventilation tubes, or roof intersections, you will need to know exactly what type of flashing will be needed in order to make the proper repairs. Of course, you can ask the people at your local home improvement center, but in many cases – the workers are not professional roof installers and aren’t entirely sure exactly what is needed. So, it will be important to do a bit of research in this area to ensure you get exactly what you need when it comes to making repairs with roof flashing.
Choosing the Right Roof Flashing
There are many different types of roof flashing such as step, chimney, skylight, valley, drip edge and vent pipe flashing. Each of these types of flashing will require a certain type of installation. They will also be needed in specific areas of the roof. As stated before, not all flashing is the same and it will be up to you to decide which type will be needed in any specific area. This is important because if you use the wrong type of flashing in any one area you could potentially create a problem area that you will not be aware of for quite some time. In order to avoid this, it will be important to choose the right type of materials for the job.
Why it Makes a Difference
Each area of the roof is completely different. Where the chimney comes thru the roof, the roof is completely different than roof intersections. Skylight areas of the roof are different than ventilation pipes. It will make a difference as to which type of flashing is used for each area to ensure repairs, or entire roof replacements, are done properly. So, to avoid finding out the hard way why certain types of flashing will make a difference, you will want to make sure you get the right type for the job.
Professional VS. Nonprofessional Installation
In many cases, installing flashing can be quite a job. There are some parts of the roof where the actual roofing materials or shingles will need to be removed completely. If this is the case, when they are replaced or put back, they will need to be installed correctly to ensure no leaks. At this point you may want to ask yourself if this is a good time to hire a professional or do the job yourself.
Something to consider at this point will be your insurance ramifications. If you decide to do the job yourself, and the job isn’t done correctly, this could potentially impact your insurance. If, for any reason, you were to experience damage from repairs you made personally, this could possibly have an effect on your insurance coverage. So, you’ll want to check into this before deciding whether you want a professional to handle the work, or you’ve decided to do it yourself.
Getting the Job Done Right
Any time you work with a roof, you’ll want to get the job done right. This will include replacing the roof flashing. The problem with working with a roof is that if you don’t know exactly what’s going on, you could potentially cause more problems as a result. When a roof has been installed properly, they are meant to last for 25, 30, 40 years. If there is a problem with your roof flashing, you will want to make sure that you do not interfere with the integrity of the roof in order to fix one specific area. By making repairs, this could indirectly affect the rest of the roof in a variety of different ways. So, before choosing to do so, it will be important to check with a professional in order to make an educated decision.
Choosing a Professional Roofing Service
When it comes to choosing a Jacksonville Roofing Contractor, it will be important for you to choose a company that has a history of replacing entire roofs as well as making repairs. This will ensure that you get the correct type of attention needed for your specific problem. Now, this is also important when it comes to replacing the roof flashing. If you know what you’re doing, you can purchase the flashing on your own and make the needed repairs. If you aren’t quite sure, it will always be important to check with a professional before making changes to your roof.
Understanding why roof flashing is important will help you when it comes to making repairs or choosing a company to replace your entire roof. As stated before, there are many different types of flashing on the market, and it will be up to you to choose the right type of roof flashing for the job. By utilizing the information provided above, you will have an excellent start when it comes to knowing what roof flashing is, and why it’s important.