A smart light switch is a device that allows you to control your home lighting using an app or voice commands. It connects to your Wi-Fi network and can be controlled remotely, allowing you to turn lights on or off, dim them, or set a schedule for when they should come on or off. If you want to buy a smart light button then, you can check the online website.
Image Source: Google
Here is a step-by-step guide to help you get started.
Step 1: Make sure you have the right supplies. You will need a flathead screwdriver, electrical tape, and a voltage tester. You should also make sure that you have the right type of smart light switch for your home.
Step 2: Turn off the power to the light switch. Before you start working, you should make sure that the power is turned off at the circuit breaker. This will help to prevent any accidents.
Step 3: Remove the existing switch. Use the flathead screwdriver to remove the current switch from the wall. Once it is removed, use the voltage tester to make sure the power is off.
Step 4: Install the new switch. Follow the manufacturer’s instructions to properly install the switch. Once it is securely mounted, it is time to connect the wiring.
Step 5: Connect the wiring. Connect the wires to the new switch. Make sure that they are securely connected and insulated with the electrical tape.